2.1.2.4 Commissioning technicians
The commissioning technician:
• has good programming knowledge
• has mechanical and/or electrical knowledge
• is flexible
The commissioning technician is responsible for the following tasks:
• commissioning the product
• testing the functions of the product
2.1.2.5 Operators
The operator:
• was trained and instructed by the operating company or the manufacturer
• has very good knowledge of the user interface and the operating elements
• has process knowledge which is specifically geared to the product
The operator is responsible for the following tasks:
• switching the control system of the product on and off
• creating production readiness
• monitoring the production process
• localizing minor malfunctions
2.1.2.6 Manufacturer's technicians
The manufacturer's technician:
• is employed on site at the premises of the manufacturer or representative
• has very good mechanical and/or electrical knowledge
• has good software knowledge
• has maintenance, service and repair experience
• has experience with Güdel products
The manufacturer's technician is responsible for the following tasks:
• performing mechanical and electrical maintenance work in accordance with
the manual
• performing mechanical and electrical service work in accordance with the
manual
• cleaning the product
• replacing spare parts
• localizing and fixing malfunctions
Safety
OPERATING MANUAL Automatic lubrication system
FlexxPump 404DLS
99079191943154059_v10.0_EN-US
18
To Next Page