GUDEL FlexxPump 404DLS - Fig. 7 -4 Inspect Automatic Lubrication System; Table 7-7 Cleaning Agents: Automatic Lubrication System: Pump, Lines, Other Components; Table 7-8 Inspection Table

7.3.3 Checking automatic lubrication system
Fig.7-4 Inspect automatic lubrication system
Cleaning agents
mild universal cleaner free from aromatic compounds (e.g. Motorex OPAL
5000)
Table7-7 Cleaning agents: Automatic lubrication system: Pump, lines, other components
Check the automatic lubrication system in accordance with the following ta-
ble.
Inspection
point
Description Measures
Contamination Check the components
for contamination:
• Pump
• Lines
• other components
Immediately clean away any
contamination
Loss of lubricant Check system and its
surroundings for traces:
• Puddles of oil and oil
spills on the floor or
in the drip sheets
• Leaks, torn or
pinched lines
• Remove puddles of oil
and oil spills on the floor
or in the drip sheets
• Replace defective and
pinched lines
Function Check function Replace defective compo-
nents immediately
Table7-8 Inspection table
Maintenance
OPERATING MANUAL Automatic lubrication system
FlexxPump 404DLS
99079191943154059_v10.0_EN-US
79