7 Maintenance
7.1 Introduction
Work sequences
Perform the work sequences in the order described. Perform the described
tasks at the specified times. This ensures a long service life for your product.
Original spare
parts
Only use original spare parts. Ü2105
7.1.1 Safety
Only perform the tasks described in this chapter after you have read and un-
derstood the chapter "Safety". Ü215
It concerns your personal safety!
WARNING
Automatic startup
During work on the product, there is danger of the machine starting up auto-
matically. This can lead to severe or fatal injuries!
Before working in the danger area:
• Secure vertical axes (if equipped) against falling.
• Switch off the superordinate main power supply. Secure it against being
switched on again (main switch for the complete system)
• Before switching on the system again, make sure that no one is in the dan-
ger area
7.1.2 Personnel qualifications
Only appropriately trained and authorized technicians are allowed to work on
the product.
Maintenance
OPERATING MANUAL Automatic lubrication system
FlexxPump 404DLS
99079191943154059_v10.0_EN-US
67
To Next Page
Loading...