EasyManua.ls Logo

GUDEL FlexxPump 404DLS - Decommissioning, Storage, and Recommissioning

Default Icon
137 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
9 Decommissioning, storage
9.1 Introduction
Only perform the tasks described in this chapter after you have read and un-
derstood the chapter "Safety". Ü215
It concerns your personal safety!
9.1.1 Personnel qualifications
Only appropriately trained and authorized technicians are allowed to work on
the product.
9.2 Storage conditions
CAUTION
Leaking fluids
During storage, substances that are hazardous to the environment can leak!
Hazardous substances must be prevented from entering the drinking water
supply. Take appropriate measures
Observe the country-specific safety data sheets
Oils and greases must be disposed of as hazardous waste, even if the total
quantity is small
Room
Store the product in a dry location. For information on the required space
and the floor capacity, refer to the layout. Use a covering to protect the
product against dust and dirt.
Temperature
The ambient temperature must remain between -10 and +40 °C. Make sure
that the product is not subjected to great temperature fluctuations.
Air humidity
The air humidity must be below 75%.
Decommissioning, storage
OPERATING MANUAL Automatic lubrication system
FlexxPump 404DLS
99079191943154059_v10.0_EN-US
95

Table of Contents

Related product manuals