LCR-1000 Series
64
COMP:TOL <NR1|NR2|NR3>
COMP:TOL?
Function： It inputs and queries the percentage deviation.
Description：
Set parameter <NR1|NR2|NR3> any form of data, the input
data is percentage data (no need to divide by
100), Do not enter the percent sign %,
Example: COMP:NOM 2 //Indicates 2%
Set syntax COMP:TOL
Query syntax COMP:TOL?
Return data <NR2> Example: 10.0
CORR:OPEN:STAT <ON|OFF|1|0>
CORR:OPEN:STAT?
Function： It sets and queries the status of the open circuit
correction function.
Description：
Set parameter <ON|OFF|1|0>
Set syntax CORR:OPEN:STAT
Query syntax CORR:OPEN:STAT?
Return data <on|off>
CORR:SHORT:STAT <ON|OFF|1|0>
CORR:SHORT:STAT?
Function： It sets and queries the status of the short circuit
correction function.
Description：
Set parameter <ON|OFF|1|0>
Set syntax CORR:SHORT:STAT
Query syntax CORR:SHORT:STAT?
Return data <on|off>
To Next Page
Loading...
