GW Instek LCR-1100 - Open;Short Circuit Correction Commands

COMMAND OVERVIEW
65
CORR:OPEN:LCR
Function： It executes LCR open circuit correction.
Description：
Set syntax CORR:OPEN:LCR
Return data <pass|fail>
Note
 “LCR open” is prompted when the correction
starts
 Prompt “pass or fail” after correction
CORR:SHORT:LCR
Function： It executes LCR short circuit correction.
Description：
Set syntax CORR:SHORT:LCR
Return data <pass|fail>
Note
 “LCR short” is prompted when the correction
starts
 Prompt “pass or fail” after correction
CORR:OPEN:DCR
Function： It executes DCR open circuit correction.
Description：
Set syntax CORR:OPEN:DCR
Return data <pass|fail>
Note
 “DCR open” is prompted when the correction
starts
 Prompt “pass or fail” after correction