H3C UniServer R4700 G6 User Manual

16
Figure 13 Drive numbering for front 4LFF drive configurations
Figure 14 Drive numbering for front 32E1.S drive configurations
Figure 15 Drive numbering for rear 2SFF drive configurations
Drive LEDs
The server supports SAS, SATA, and NVMe drives. You can use the LEDs on a drive to identify its
status.
Figure 16 and Figure 17 shows the location of the LEDs on a drive.
Figure 16 Drive LEDs
(1) Fault/UID LED
(2) Present/Active LED
Figure 17 E1.S drive LEDs
(1) Fault/UID LED
(2) Present/Active LED
To identify the status of a SAS or SATA drive, use Table 11. To identify the status of an NVMe drive,
use Table 12.

H3C UniServer R4700 G6 Specifications

General

Brand	H3C
Model	UniServer R4700 G6
Category	Server
Language	English