Page 28
Installation
2.6 Wiring connections for PAT700 with quick-connect fittings
Refer to this section if the PAT700 has five quick-connect fittings, as illustrated in
Figure 14.
• One connector accommodates power supply wiring.
• The other four connectors accommodate 4-20 mA or discrete I/O wiring.
• The analyzer comes with factory-supplied mating connectors and a plug-in cord for
power supply wiring.
Figure 14 PAT700 power supply and I/O wiring terminals
4-20 mA output wiring
connector
Digital input wiring connector
Serial communications wiring
connectors
(see Serial ports, page 33)
Power supply wiring
connectors
Digital output wiring
connectors
To Next Page
Loading...
