– 27 –
The third rack is designed to place silverware,
cutlery and other utensils at the top of the
dishwasher for easier access.
To Remove the Basket and Frame as an
Assembly:
1. Pull the rack out to full extension.
2. Lift and continue to pull the rack out.
3. When rear rollers contact the stop, lift and
continue to pull the rack off the rails.
The rails may be removed by releasing the rear
end cap. Push the tab and remove the endcap.
There are a variety of silverware baskets and
congurations available. Consult the Owner’s
Manual for silverware basket information.
Silverware Baskets
Third Rack (Some Models)
Third Rack Brackets
To remove the brackets, the dishwasher must be
removed from installation.
1. Remove the basket and the frame.
2. Remove two 1/4-in. hex-head screws.
3. Remove the two mounting nuts.
4. Remove the bracket from inside the
dishwasher.
Third Rack Rail Rollers are secured to the
bracket with T-20 Torx-head screws.
1/4" hex-head screws
Mounting nuts
To Next Page
Loading...
Need help?
General
