EB+ Soft Docking Installation guide
48
Innovative Vehicle Solutions 2020
Error repair
Error repair / sensor diagnosis
There is no fuse to change.
Fuses are resettable.
Diagnosis is done by DIAG+ Software.
If ECU box is opened warranty is void.
When adding or moving sensors, DIAG+ software may be used to make a complete check of the system.
If lights stay frozen when reverse is engaged, the system has detected an error.
Attention:
EB+ Soft Docking is protected against an AC voltage supply, but will not function. It will function again correctly
when reconnected with a DC supply.
If the EBS is not powered (or EB+ Soft Docking is unplugged), the lights will be switched off when position
function is activated. The system will not operate.
If one sensor is removed or moved the system will detect an error. To clear the error, a reset and EOL test must be
performed with the DIAG+ software.
To Next Page
Loading...
