EB+ Soft DockingInstallation guide
51
2020 Innovative Vehicle Solutions
Bleeper
Sensor
Painting
Masked areas
In the event of paint or coating work all none used
connections, bleeper and sensors must be protected.
These are indicated by the yellow shaded areas as
shown. Adequate protection should be used to avoid
penetration of the paint or coating. All electrical ports
to have connectors or blanking plugs installed during
painting.
Painting recommendations: water based, baking for
1 hour @ 100oC
Electro static painting: Haldex recommends that the
EB+ Soft Docking assembly is fitted to the trailer after
electro static painting.
To Next Page
Loading...
