Preventative Maintenance Alarm.
• On (factory setting)
• Off
Maintenance
• Total Number of lifts (display only, not programmable)
• Lifts since last maintenance (see ‘Preventative Maintenance’, below)
• Total number of lift hours (display only, not programmable).
• Total lift hours since last maintenance (see ‘Preventative Maintenance’, below)
If the lift has the return-to-charge (“RTC”) feature, the following programming choices will also
be available:
RTC Max. Time
• 60 seconds
• 120 seconds (factory setting)
• 180 seconds
• 240 seconds
RTC Drop Time
• 9 seconds (factory setting)
• 12 seconds
• 15 seconds
• 18 seconds
• 21 seconds
• 24 seconds
RTC Speed
• 2
• 4 (factory setting)
• 6
• 8
To Next Page