2. Operating instructions for instrument
keys：
Caution
Please ensure the handbrake is pulled up and
the gear-shifting switch is in the “N” position
before any operations.
Key 2: Move down
or decrease
progressively
Key 3: Function
menu or To confirm
Enter the setting information display interface
after pressing Key 3.
2.1 After-treatment system (1.5t-3.5t forklift
truck does not have this function)
2.2 Speed setting
When the cursor stops at "Speed Setting",
press “Key 3” to enter the speed setting page.
Press “Key 2”, the number changes from large
to small, then press “Key 1”, the cursor jumps
to the next number; press “Key 2” together
with “Key 1” to set the pulse number and
alarm speed as required, then press “Key 3”
when finished. This completes the speed
setting.
2.3 English/Chinese settings
When the cursor stops at "CN/EN", press “Key
3” to switch between English and Chinese.
To Next Page
Loading...
