CAN Bus Instrument (W98/W97)
1. Instrument indicator lights
Water temperature gauge
When the ignition key switch is in the ┃ (open)
position, the water temperature gauge is active,
displaying the engine coolant temperature; in
normal operation the LCD will show that it is
within the range 40℃-110℃.
Caution
Stop operation immediately and reduce
engine speed to cool down the engine
and then stop the engine when the
gauge is in the red area. Check the
coolant level is sufficient and whether
the fan belt is tight.
Fuel gauge
When the ignition key switch is in the ┃
(open) position, the fuel gauge will display the
approximate fuel quantity of the fuel tank.
It is recommended to fill up the fuel tank
everyday after work .
Stopwatch
When the ignition key switch is in the ┃
(open) position, the stopwatch will start
running. The stopwatch reading will increase by
one for every hour of operation.
The stopwatch displays the cumulative working
hours of the forklift truck.
Caution
After the cumulative hours reaches
100h (the factory default interval is
100h, and it can be adjusted) displayed
on the stopwatch, the “wrench” icon
will flash for 1 hour to prompt that the
forklift truck needs to be serviced.
Consult monthly maintenance after the
first flash. Check the information about
the maintenance cycle schedule in
detail for each cycle. The specific flash
time depends on the actual situation.
To Next Page
Loading...
