Charging indicator light
The light displays the battery charge status,
turns on when the starting switch is in the ┃
(open) position, and turns off when the engine
is started.
Caution
If the light continues to turn on or flash
during operation, it indicates that the
charging is abnormal and immediate
inspection is required.
Preheat indicator light [diesel forklift truck]
The light turns on for a short period after the
switch is moved to the ┃ (open) position,
and the switch can be moved to the (start)
position to start the engine after the light turns
off.
Engine oil pressure alarm indicator light
The light indicates the pressure of engine
lubricating oil.
Caution
If the light continues to turn on or flash
during operation, it indicates that the oil
pressure is less than 0.05MPa and
immediate inspection is required.
Parking indicator light
When the light turns on, it indicates that the
parking brake is applied. In order to drive the
forklift, the parking brake lever (e.g. hand
brake lever) should be released; when the lever
is released, the light turns off.
Warning
Driving the truck when the light is on
may cause damage to the engine, drive
system and other components.
Oil-water separator indicator light [diesel
forklift truck]
The light turns on when the water precipitation
reaches a certain level when the engine is
running.
If the light continues to turn on or flash when
the engine is running, the engine should be
shut down immediately to discharge water.
Caution
If operation is continued after the light
turns on, the fuel oil injection pump may
be damaged.
Neutral start indicator light
When the forklift is temporarily stopped, the
direction lever should be in the neutral
position; when the lever is in neutral, the light
turns on.
The truck can only be started when it is in
neutral.
The truck must not be in the neutral position
when driving downhill.
Gearbox oil temperature alarm light [hydraulic
forklift]
To Next Page
Loading...
