The differential lock is a mechanism installed
on the center differential and used for
4WDforklift trucks. Its function is to improve
the traction of forklift trucks in poor road
conditions or extreme conditions, when one
wheel of forklift truck is slipping the differential
lock can quickly lock the differential, so that
the left and right wheels become rigidly
coupled. In this way, most or even all of the
torque can be transferred to the wheel that is
not slipping, and maximum traction can be
achieved so that the forklift can continue
moving.
Caution
The differential lock is only to be used
under poor road conditions or extreme
conditions, and long-term use during
normal driving will cause serious
damage to the tires, drive shafts and
other components. Therefore, please
push the differential lock switch upward
when driving normally.
The differential lock must be switched in
the power-off state.
Accelerator pedal [10]
When the accelerator pedal is pressed, the
engine speed and the forklift speed will
increase; when the accelerator pedal is
released the engine speed and the forklift
speed will decrease.
Brake pedal [11]
When the brake pedal is pressed the forklift
slows down; when the brake pedal is pressed
to the bottom, the forklift stops. When the
pedal is released the forklift runs freely.
Caution
Avoid emergency braking. Emergency
braking can easily cause the forklift to
tilt or cargo to fall.
When the pedal is pressed, the oil pressure of
the hydraulic clutch will drop. When the pedal
is pressed harder, the forklift truck will be
braked. The pedal can be used when the
forklift truck slows down to approach cargo or
conducts loading and unloading operations.
Caution
Do not use the inching pedal
excessively. If the pedal is used as a
footrest or used for a long time, it may
cause overheating of the automatic
transmission oil or clutch slip.
Emergency power-off switch [14]
Press down the emergency power-off switch to
To Next Page
Loading...
