Hanna Instruments Edge - Page 16

Setup/Installation
16
Parameter Description Choices Default
Basic mode*
(EC and pH)
Probe Specic Parameters are inserted here in SETUP list.
Set Date Press MODIFY
key to Set current
date, displayed
in ISO format.
Press CFM to save
changes.
YYYY/MM/DD
Date
Set date Available
Set Time Press MODIFY
key to Set current
time, displayed
in ISO format.
Press CFM to save
changes.
24hr:MM:SS
Time
Set time Available
Set Auto O Used to save
battery life by
automatically
turning o when
no key press is
detected for
time set and
meter is not in
active logging or
calibration mode.
5, 10, 30, 60
Min
or O
10 MIN Available
Sound If enabled, a
short audible
tone is produced
or key stroke
or calibration
conrmation and
a longer tone for
wrong key.
On or O On Available
Temperature
Unit
Select degree
Celsius or
Fahrenheit scale
for displayed
and logged
temperatures.
ºC or ºF ºC Available
General
Setup