19 Installation & Controller Start-Up
Wall‑Mount Hardware & Steps
The controller can be mounted on a wall using a Wall‑Mount panel that can be fixed either horizontally or vertically.
Use the Wall‑Mount panel with appropriate hardware. See table, description column, for details.
The mounting kit does not include the fasteners required for attaching the Wall‑Mount panel to the wall.
Fasteners type and length selection must be based on wall type i.e. concrete, brick, metal, wood as well as
wall thickness.
Note: The four slots in the Wall-Mount plate are for user-supplied mounting fasteners between Ø 6.0 mm
(1/4”) and Ø 8.0 mm (5/16”).
1 32 4 5
Figure 7: Wall‑Mount Schematic
Wall‑Mount Hardware
Label Description Quantity
1 Process controller 1 pc.
2 Zinc‑plated, Wall‑Mount panel 1 pc.
3 Plain washer for M6 screw 4 pcs.
4 Spring washer for M6 screw 4 pcs.
5 M6 × 12 mm screw (DIN 7985) 4 pcs.
To Next Page
Loading...
