57 Cleaning
• With Cleaning selected, press Setup to enter screen.
Enable
b
Setup
• At prompt, enter the passcode.
• At prompt, press YES to place unit in HOLD.
•
Enabled* option has to be active (check mark displayed) for the rest of the configurable parameters
to be modified.
• Use the
ud keys to move between parameters.
• Press the
b key to return to the menu without saving.
Enabled
Option: Enabled, Disabled
With Enabled selected, press the corresponding virtual key to enable (activate) cleaning mode or disable
cleaning mode.
Type
Option: Simple, Advanced
With Cleaning Type selected, press Advanced or Simple, to toggle options.
Ext. Trigger
Option: None, Input 1, Input 2
This is a read‑only parameter that indicates what Input, if any, has been assigned to start cleaning.
With two inputs configured, press View to display configured trigger input options.
To Next Page
Loading...
