81 General Settings
Startup Delay
Option: 1 to 30 minutes
Startup Delay is a timer used to prevent Control functions (relays or outputs configured for measurement or
temperature) from functioning during controller startup.
• With item selected, press Set to modify the time.
• Press the
ud keys to increase or decrease the value (keep the key pressed to fast‑forward).
• Press CFM to save.
During power up the following will be displayed as the counter counts down in 10 seconds intervals.
Setup Timeout
Option: 1 to 30 minutes
Setup Timeout is a timer used to bring the controller back to Measure mode from another mode when no keyboard
input has occurred. Selected changes will not be saved.
• With Setup Timer selected, press Set to modify.
• Press the
ud keys to increase or decrease the value (keep the key pressed to fast‑forward).
• Press CFM to save.
Setup Note: The controller validates the configured Setup when attempting to exit Menu and directs the user
to any invalid parameters. At prompt, to save changes, press YES to confirm choice.
To Next Page
Loading...
