Main Features
Calibration & Measurement
• Measure
` Conductivity – μS/cm or mS/cm
` Resistivity –
Ω•cm, kΩ•cm, MΩ•cm
` TDS –
ppm or ppt
` Salinity – ppt, PSU, %
• Application‑specific profiles for quick and direct measurement without the need to update the sensor and
system settings
• Active log during measurement
• Measurement stability indicator (using the Stability Criteria setting)
• Reading modes: direct and direct / autohold
• Temperature source (Automatic or set manually)
• Audible and / or alarm messages for measurements outside threshold limits
• Galvanic isolation for conductivity measurement module
•
Standard (up to)four-point conductivity calibration with standards for cell factor determination and
0 μS/ cm for offset:
84 μS/cm, 1413 μS/cm, 5.0 mS/cm,12.88 mS/cm for the 0.1/cm cell
80.0 mS/cm, 111.8 mS/cm additional standards for the 1.0/cm cell
• Standard single point salinity calibration in 100 % salinity standard, with Salinity scale set to %
• Non‑volatile memory saves data and settings
Logging
• Data log collection of at least 1 000 000 data points (with time and date stamp)
• Logging types: manual, automatic, autohold
• Sample ID for manual and Autohold data
Connectivity features & services
• Transfer logged data to a USB thumb drive
• Log files that include measurements and calibration data (as .CSV file)
• FTP and email for log export via Ethernet and Wi‑Fi connection
• Download logs using the benchtop’s embedded web server
• USB type A for USB stick, printer, keyboard
• USB type C for USB stick and PC connection
User-support feature
• Help section – brief overview of instrument’s main functionalities and features
7 General Description & Intended Use
To Next Page
