File Name
Available only with Manual and Autohold logging type selected.
To create a file name, from Logging screen:
1. Tap Create.
2. Use the on‑screen keypad to enter file name (maximum 13 characters).
3. Tap Enter to confirm.
Log Note & Log Info
Notes on measured data are saved together with logged data.
Sample ID
Manual and autohold samples can be labeled with a numerical ID (increments with each new sample logged),
a text label, or a text label with numerical ID.
With Increment selected:
1. Tap Sample ID Prefix.
2. Use the on‑screen keypad to enter a text prefix, of maximum 15 characters, to the sample name.
3. Tap to confirm.
4. Select ID number from scrollable list.
9.7. PROFILES
Option: Profile Feature, Current Profile (configure), Load Profile (previously configured)
Profile Feature option can be enabled or disabled.
Current Profile
A profile is a sensor setup complete with required measurement and temperature unit, display preference, and
alarm threshold options. Once configured and saved the profile can be loaded for applications that require
similar configurations.
To save a profile, having previously configured all other application‑specific options, from the Measurement screen:
1. Tap .
2. Tap Profiles tab.
3. Tap Save As and use the keypad to enter profile name.
4. Tap to confirm.
Once saved, profile name is added to the Load Profile list.
Load Profile
To select a configured profile:
1. Tap to select from the Load Profile list.
2. Profile name is automatically entered in the Current Profile field.
47 Measurement & Probe Setup Menu
To Next Page
Loading...
Need help?
General
