Hanna Instruments HI6321 - 9.2. READING

Cell Constant: allows users to adjust cell measurement to compensate for the measured properties.
• Tap dedicated field and enter value.
• Tap
to save.
Calibration Points: allows users to select a Single Point or Multiple Points calibration.
9.2. READING
Options: Parameter, Units/Salinity Scale, TDS Factor, Stability Criteria, Reading Mode, Probe Type
Parameter
Options: Conductivity, Resistivity, TDS, Salinity
Tap to select measurement configuration.
Units & Salinity Scale
•
Conductivity Options: µS/cm, mS/cm, AutoRanging i.e meter automatically selects the unit to optimize
the measurement.
• Resistivity Options: Ω•cm, kΩ•cm, MΩ•cm, AutoRanging
Resistivity is calculated from conductivity measurement.
Measurement & Probe Setup Menu 38