Happy HCS - Putting the hoop on the machine

-CS -46
6-3
SEWING WITH TUBULAR FRAMES
6_3 H402
Putting the hoop on the machine
1. Move the frame base to the approximate
center position before inserting the tubular
embroidering frame.
2. Insert the embroidery frame.
Make sure that the holder pins are inserted into
the positioning holes of the frame base on each
side.
Holder
Holder
Embroidering hoop
Positioning hole
Positioning pin
Positioning hole
Positioning pin
Frame base
1
2
CAUTION: To avoid problems.
Please do not hit or
push embroidering hoop
to presser foot.