Happy HCS - Starting from a midpoint of a design (F.Posi)

-CS -64
9-6
SEWING
9_6 D424
Starting from a midpoint of a design (F.Posi)
This function allows you to go directly to a stitch number or a color change and positions the
hoop correctly.
P.FOOT T.CUT
MENU
FORWARD
ENT.
P.FOOT T.CUT
MENU
FORWARD
ENT.
P.FOOT T.CUT
MENU
FORWARD
ENT.
P.FOOT T.CUT
MENU
FORWARD
ENT.
P.FOOT T.CUT
MENU
FORWARD
ENT.
P.FOOT T.CUT
MENU
FORWARD
ENT.
[MENU] Pattern
Needle
1
[MENU] F•Posi
Create
2
[F•POSI]
Stitch: 0
3
[F•POSI]
Stitch: 0
4
[F•POSI]
Stitch: 5643
5
[F•POSI]
Stitch: 5643
P.FOOT T.CUT
MENU
FORWARD
ENT.
- Calculating -
6
7
: Beginning of any couloir number
2
1
3
+ : Any stitches
+
Stitch (Number of stitches )
This moves the frame to any stitch number
desired.
ID:10 Nd: 4
5643
G
Stitch
1. Press the "MENU" button until [MENU] is
shown when the machine is stopped.
2. Press the “Up” or Down” arrow button until
the cursor points to "F •Posi".
3. Press the "ENT." button when showing
[F•POSI].
4. Press ”Right” arrow button.
The cursor will move to be under the needle
number.
5. Pressing the ”Left” or ”Right” arrow button,
moves the cursor to select which number to
change.
Press the “Up” or “Down” arrow button to
set each number to the needed stitch num-
ber.
The number will increase by pressing the “Up”
arrow button.
The number will decrease by pressing the
”Down” arrow button.
6. Press the "ENT." button.
The cursor will return to the left side.
7. Press the "ENT." button.
After the controller displays "- Calculating -", the
frame will move to the selected stitch number
position.
Change (Color position )
This moves the frame to the beginning of any
color number.
CAUTION: To prevent accidents.
The frame moves quickly.
Keep your hands away from the frame.