Happy HCS - SPECIFICATIONS • MAINTENANCE; Specifications; Oiling

-CS -70
10-1
SPECIFICATIONS • MAINTENANCE
10_1 F201
Specifications
CAUTION: To prevent accidents.
When taking care of the machine, be sure to remove the plug.
Oiling
egatloV%5+~%01-V511~V001esahp1 %01+~%01-V032~V002esahp1
noitpmusnocyticirtcelEhW022hW022
ycneuqerF05
/ zH06
noitidnoclatnemnorivnE
C°04~0erutarepmeT
%58~54erutsioM
noisnemiD
)htpeDxthgieHxhtdiW(
"3.92x"92x"5.12,mm547xmm437xmm645
thgieWgK04
)XxY(aerayrediorbmE
1*.xaM"4.11x"2.11,mm092xmm582)02323-ATPfodleifweS(emarfralubuT
2*.xaM"7x"6.2,mm081xmm76)noitpO(emarfpaclamroN
2*.xaM"4.11x"6.2,mm092xmm76)noitpO(emarfpacediW
yticapacyromeMsehctits000,052
nrettapderetsigeR.tap99
*1 Actual embroidery area will be restricted in accordance with inner frame size.
*2 Actual embroidery area will be restricted in accordance with shape of a cap.
Specifications are subject to change without notice.
Please lubricate the specified oil locations according to the instruc-
tions below.
Running the machine without proper oiling will damage the machine.
Lint will gather in and around the rotary hook. Rotary hooks then wear
which will cause the threads to break. Please clean lint with a brush
and run the machine idly for 2 ~ 3 minutes.
When oiling the pressure foot guide bar, please move the head to
the left and set it to needle No. 1.
Too much oil may stain fabrics and threads.
kraM.oNliootecalPliodeificepS
A1 koohyratoR
dnahsurbllamsahtiwylthgilsliohtiwetacirbuL(
rennidnaretuoehtneewteblioenihcamgniwes
).strapkoohyrator
gniweS
lioenihcam
B2 rabediugtooferusserP
3tfahsdaeH
4rabeldeeN
2
4
1
2
3
The machine will advise you that lubrication is necessary on the basis
of stitch number.
When it is turned on, the machine will display an icon and letter to
indicate that lubrication is necessary.
3-4
A B