Happy HCS - Page 84

To Next Page

To Previous Page

-CS -74

10-5

ERRORS AND WHAT TO DO

10_5 D609

091edalbtuC.noitisoppotstatonsiefinktucdaerhT.wolebsnoitcurtsniehtwolloF7-01

391rehctaCnoitisopstiffosikoohhctacdaerhT

tonsinoitisoptcetedothctiwstimiL

."FFO"

.wolebelpmasxeehtwollofesaelP

.daerhttuctonseodtifikcehC.1

ehtnruterdnatituc,tuctonsidaerhtfI

.noitisoplamronstiotkoohhctacdaerht

hctacdaerhtfikcehc,tucerasdaerhtfI.2

noitisopstiotdenrutersahdaehnokooh

.yletelpmoc

8-01

.oN

yalpsiD rorrE snoituloS egaP

Main Page

Table of Contents3
Important Safety Instructions4
Setting up the Machine6
- Remove the Machine from Box6
- Accessories8
- Assemble Machine Unit9
- Machine Installation10
- Grounding Instruction12
- Disposal of a Battery12
Main Parts14
How to Read These Instructions15
Message16
LET'S TURN on the MACHINE How to Turn on the Machine17
- If the Display Is Not Clear19
- Calendar and Clock Setting20
Function of the Control Box21
Control Menu23
Inserting a Needle24
Select Needles and Threads25
Backing Materials26
BOBBIN WINDING Winding the Bobbin27
- Removing the Bobbin28
- Inserting the Bobbin28
- Adjusting Bobbin Thread Tension28
- Inserting the Bobbin Case28
THREADING the MACHINE How to Thread Upper Thread29
Machine Settings32
Preparation of Pattern Data34
- Connecting to a PC by Serial or USB Connection34
- Reading Embroidery Pattern Data from the PC34
- Read Embroidery Pattern Data from Memory Media35
- Select Embroidery Pattern from Memory38
- Erase All Designs40
- Export Memorized Pattern from Memory41
- How to Select Monogram Letters43
Setting Automatic Color Change48
Sewing with Tubular Frames50
- Installing and Removing the Frame Base50
- How to Hoop51
- Putting the Hoop on the Machine52
- Starting to Sew53
CAP FRAME (OPTION) Changing the Needle Plate54
- Installing and Removing the Cap Drive Frame55
- Normal Cap Frame58
- Wide Cap Frame61
- Starting to Sew64
Adjusting the Thread Tensions66
Adjusting the Laser Pointer (Option)68
Sewing69
- What to Do if the Thread Breaks While Sewing69
- Stopping and Resuming Sewing69
- Loss of Power While Embroidering70
- Moving the Hoop While Embroidering then Returning to the Correct Location (Position)71
- Moving to the Beginning Position of Pattern (Origin)71
- Going Back to the Start of Design Data (Top)72
- Placing the Design in the Center of the Selected Embroidery Frame (Center)72
- Rotating and Mirroring Designs (Convert)73
- Starting from a Midpoint of a Design (F.posi)74
OTHER SETTINGS Create Network76
Log-In • Log-Out • Turn-Off79
SPECIFICATIONS • MAINTENANCE Specifications80
- Oiling80
- Cleaning of the Rotary Hook81
- Cleaning the Thread Cutting Knife81
Errors and What to Do83
Initializing of Machine Settings88
Initializing of Machine System88
Initializing of Machine Speed88
Change of Thread Break Detection90
Helpful Hints91
Embroidery Terms92
Built-In Font List93

Happy HCS - Page 84

Table of Contents

Related product manuals