HI 1756-WS MANUAL
TRANSMITTER ZERO Value the transmitter puts out with the minimum
weight on the load cell.
TTL Transistor-Transistor Logic
TXD Transmit Data
UPDATE RATE Number of times per second a new weight reading is
taken.
WAVERSAVER
®
Setting to remove the effects of ambient vibration
from interfering with a weight reading. The range of
settings is to eliminate vibration at various frequen
-
cies.
ZERO Weight reading once the dead load has been offset.
ZERO CALIBRATION Offset of the value of the dead load of the weight hop-
per.
ZERO TOLERANCE The number of graduations from zero that will be
accepted as zero by the instrument.
ZERO TRACK
ENABLE
A bit that is set to allow the module to zero out any
accumulated product on the scale up to the Auto Zero
Tolerance setting without operator intervention.
To Previous Page
Loading...
Need help?
General