3-2 Notice on handling
3-2
3-2 Notice on handling
Handle the RSF supermini series actuator carefully by observing the notices specified below.
Do not plug the actuators directly into a commercial line power
source.
This could burn out the actuator, potentially resulting in a fire
and/or electrical hazard.
(1) Do not apply impact or unnecessary excessive force to output flange of
actuators.
(2) Do not put actuators on in a location where the driver could easily fall.
(3) The allowable temperature for storage is from -20°C to +60°C. Do not
expose it to the sunlight for a long time and do not store it in areas with
widely fluctuating temperatures.
(4) The allowable relative humidity for storage is less than 80%. Do not store it
in highly humid place or in a place where temperature changes excessively
during the course of a day.
(5) Do not use or store the actuator in locations subject to corrosive gases or
dust particles.
To Next Page
Loading...
Need help?
General
