52
X2D 100C
User Manual
CONTENTS
Auto Focus
Activate autofocus by half-pressing the
shutter release button or pressing the AF-D
button.
Focus is determined by the max contrast
within the central marked area. When the
contrast is not high enough, focus can not
be set correctly.
The focus point display varies in different
scenarios. See the illustrations here and the
following descriptions.
White focus point.
Green focus point. AF set correctly.
Red focus point. AF analysis failed to focus.
Some H System lenses do not support AF.
The camera will default to Manual Focus
Mode for such lenses.
In AF, the shutter release will be locked until
the camera finds the optimal focus setting
to make sure that no images are made while
not focused. The lock time is short in normal
conditions. In good lighting conditions the
camera will set the focus correctly in a short
time.
Refer to the Manual Focus section for tips
on using the manual and autofocus settings
combined.
0.0
0.0
0.0
To Next Page
Loading...
