54
X2D 100C
User Manual
CONTENTS
Autofocus Single
Half-press the shutter release button or press and hold the AF-D button to focus. Focusing
will not restart if the camera or the subject moves.
• In this mode, the lens will focus at one distance and will remain focused at that distance
while half-pressing and holding the shutter release button. In this way, users can focus
on the subject, temporarily positioned within the focusing zone, and half-press and hold
the shutter release button and recompose. As a result, the focus remains on the subject
chosen even though it is now outside the focusing zone.
• For objects close to the camera and with wide-angle lenses, it is recommended to move
the focus point into focus.
To Next Page
Loading...
