4C20 Gasoline Engine Repair Manual
(b) Insert a screwdriver inside the oil seal and pry it out.
(a) The repair procedure is described in the following sequence:
4. Attention! Be Careful, Caution, Hint
attention.
(a) This Manual contains warnings, notes and tips.
(1) The diagram shows what needs to be done and where.
(d)
Hint. Additional information is available in the paragraph with this symbol to help you get the job done more efficiently.
5. Symbols
(b)
(2) The section required for repair is determined by the title of the work order.
(a) Disassembly: the separation of a mechanism (such as an engine) into separate parts.
(b) Installation: fastening components and parts (eg engine) according to specifications.
(c) Inspection: Inspection, control and measurement for the purpose of identifying and determining faults (engine).
(3) It provides information on how to do the job and other technical information. For example, specifications, number and size of fasteners,
etc. And what should be paid special attention to
Attention! Ignoring the requirements of the paragraph with this symbol can lead to serious injury.
or death.
For example:
(d) Washing, cleaning: removing dirt, dust, oil stains, etc.
(e) Tightening, fastening: turning a fastener to fasten something; external influence for
1. Removing the balance shaft seal
(V)
(a) Pry off the oil seal with a screwdriver.
Note. Ignoring the requirements of the paragraph with this symbol may result in damage
fixing the part.
vehicle or parts thereof.
2
Machine Translated by Google
To Next Page
Loading...