Section I Main Specifications
4C20 Gasoline Engine Repair Manual
Cylinder compression pressure (at 300 rpm) (kPa)
Compression pressure difference between two
cylinders (kPa)
Type of cooling system
82.5×92
Electronically controlled individual ignition coils
(b) 110°C
Number of cylinders Bore
and stroke (mm) Engine displacement (l)
Rated power (kW at rpm):
Maximum torque (N•m at rpm) Minimum fuel
consumption (g/kW•h) Steady speed idle speed (rpm) Fuel
type (octane rating) Cylinder firing order
(ignition) Direction of rotation (as viewed from the
output side)
1-3-4-2
ÿ90
Spark plug
Engine oil Rated
engine operating temperature Maximum coolant
temperature Thermostat opening temperature Thermostat
full opening temperature Engine net weight
(without A/C compressor, power steering pump,
coolant)
Specifications
160/5500
(d) 101°C
In accordance with GB 18352.5-2013
ÿ75 at idle speed;
ÿ275
4C20
Liquid, with forced circulation of coolant
The amount of harmful emissions (g / km)
Compression ratio
Engine oil pressure in the main oil line (kPa)
FR6K1332S (BOSCH) SIFR6B7G (NGK)
(a) 90°C-100°C
Type
Not less than 95 (GB 17930-2011)
1760±45
Coolant
Forced with spray
Counterclock-wise
(c) 88°C-92°C
Based on ethylene glycol
4
245-539 at 3000 - 5500 rpm
2
Name
Ignition system
155±3
Model
9.6:1
324/2000-4000
Basic version dimensions (LxWxH) without gearbox 638×698×780
Type of lubrication system
Gasoline, four-stroke, liquid-cooled, in-line, direct
injection, turbocharged, 16-valve, double overhead camshafts,
variable valve timing on intake and exhaust, two balancer
shafts
750±25
SAE 5W-40 API SM
Chapter II. Technical information about the engine
4
Machine Translated by Google
To Next Page
Loading...