60±2 Nm
Second
stage First
stage
Second
stage First
stage Second
stage First
stage Second
stage First
stage Second
stage First
stage
Second
stage Third
stage First stage Second stage First stage
Restrictions on
40±2 Nm
Connecting rod bolt
10±1 Nm
crankshaft
flywheel bolt
Bolt of fastening of a cover of radical
Component name
150°±2°
Bolt of fastening of a phase shifter of
the VVT system
Rotate 60°±2°
Second phase
Rotate 100°±2°
20±1.6 Nm
Horizontal block pinch bolt
Rotate 90°±2°
Impulse disc fixing screw
First stage
Rotate 90°±2°
To be replaced
Rotate 90°±2°
Rotate 90°±2°
Bolt of fastening of a head of the
block of cylinders
Crankshaft pulley bolt
after removal
150±3 Nm
use
shaft
Rotate 90°±2°
Tightening torques
40±3 Nm
40±2 Nm
bearing
Rotate 120°±2°
20±2 Nm
3 times
Chapter II. Technical information about the engine
5
Section II Tightening torques for threaded connections
Machine Translated by Google
To Next Page
Loading...