Chapter VIII. Cooling system
giving liquid.
on the coolant pump housing.
bones
3. Check the tube for cracks, deformation of the flange, etc. A damaged tube must
be replaced.
comrade
(d) Fix the tube to the cylinder block with 2 bolts
ÿ Tightening torque: 10±1 Nm.
1. Removing the inlet hose of the electric coolant pump
5. Installing the electric pump inlet hose
(a) Loosen the 2 clamps and remove the electrical supply hose
4. Installing the hot cooling outlet pipe
liquids
pump.
sa cooling system
(a) Install the electric coolant pump inlet hose and secure with 2 clamps.
2. Removing the hot coolant outlet pipe
(a) Check that the O-ring (1) of the hot coolant outlet pipe is installed correctly.
(a) Loosen the 2 bolts and remove the hot coolant outlet pipe
(b) Apply a small amount of coolant or petroleum jelly to the O-ring (1).
(c) Install the hot coolant outlet pipe
Section IV. Hot coolant outlet pipe
Examination
Assembly
Disassembly
45
Machine Translated by Google
To Next Page
Loading...