Chapter VIII. Cooling system
(a) Remove the 2 bolts and remove the hot coolant outlet pipe
Disassembly
(a) Remove the 2 bolts and remove the pump drive belt cover
3. Removing the coolant pump drive belt cover
1. Removing the electric coolant pump
cooling systems.
Clue:
ÿ The coolant pump drive sprocket bolt is turned out clockwise.
denia
(a) Loosen the 3 clamps (1, 2 and 3) and remove the electric
pump inlet hose.
5. Removing the cooling pump drive belt
Note:
ÿ After removing the coolant pump drive belt
(b) Remove the 3 bolts (A, B and C) and remove the electrical
4. Removing the toothed pulley of the pump drive of the oh system
getting along
cooling system pump.
to be replaced.
2. Removing the hot coolant outlet pipe
(a) Lock the flywheel with a locking tool
bones
flywheel.
(b) Remove the coolant pump drive sprocket bolt and remove the
sprocket from the inlet balancer shaft.
39
Machine Translated by Google
To Next Page
Loading...