(a) Loosen the bolt and remove the cylinder head oil outlet pipe.
sti
2. Removing the hot coolant outlet
Note:
(a) Remove the 2 bolts and remove the hot coolant outlet pipe.
(2) Remove bolts 1-23.
Note:
3. Removing the head cover oil outlet pipe
ÿ Do not allow the piston to be at top dead center while the
camshaft is rotating. Risk of damage to valves and/or
piston head!
ÿ If the bolts are removed in the wrong order, the camshaft
bearing cap may be bent or cracked.
ÿ When replacing the cylinder head or cylinder head gasket,
the coolant must be
cylinder block
(a) Loosen the bolts (A) and remove the cylinder head oil outlet
pipe (B).
replacement.
1. Removing the oil outlet pipe of the qi block head
4. Removing the camshaft bearing cap bolts
Lindrov
(a) Removal sequence
(1) Remove bolts 29-24.
4C20 Gasoline Engine Repair Manual
Disassembly
66
Machine Translated by Google
To Next Page
Loading...