Hawking HW12ACM User Manual

49
Guard Interval
Set the guard interval. A shorter interval can improve
performance.
802.11n Protection
Enable/disable 802.11n protection, which increases reliability
but reduces bandwidth (clients will send Request to Send (RTS)
to access point, and access point will broadcast Clear to Send
(CTS), before a packet is sent from client.)
DTIM Period
Set the DTIM (delivery traffic indication message) period value
of the wireless radio. The default value is 1.
RTS Threshold
Set the RTS threshold of the wireless radio. The default value is
2347.
Fragment Threshold
Set the fragment threshold of the wireless radio. The default
value is 2346.
Multicast Rate
Set the transfer rate for multicast packets or use the “Auto”
setting.
Tx Power
Set the power output of the wireless radio. You may not
require 100% output power. Setting a lower power output can
enhance security since potentially malicious/unknown users in
distant areas will not be able to access your signal.
Beacon Interval
Set the beacon interval of the wireless radio. The default value
is 100.
Station idle timeout
Set the interval for keepalive messages from the access point
to a wireless client to verify if the station is still alive/active.

Hawking HW12ACM Specifications

General

Brand	Hawking
Model	HW12ACM
Category	Wireless Access Point
Language	English