USE ONLY GENUINE REPLACEMENT PARTS
Page 4 of 20 Control Station Rev. A
GENERAL
The Control Station is a pool equipment control and treatment regulation system.
The Control Station allows you to control the filtration system (pump) as well as the peripheral equipment (heat pump,
lighting, etc.).
It also allows you to treat your pool effectively via liquid chlorine injection. The Control Station is suitable for treating most
residential swimming pools.
The quantity of chlorine required to treat a pool correctly varies according to the number of bathers, the rainfall, water
temperature and the cleanliness of the pool...
INSTALLATION
Description
1
2
3
4
5
1 Control box
2 On/Off switch
3 Power cable
4 Fuse 3.15 A
5 Fuse 630 mA
pH
probe
Measuring
chamber
2 x Peristaltic
pumps
ORP probe Screen remote kit
(Optional)
Wi module
Temperature
probe
The fuses are either
on the side or the
bottom of the control
box.
To Next Page
Loading...
