HBM MX1601B - Page 200

Accessories
200 I3031-14.0 HBM: public Quantum
X
Module accessories
Voltage supply
Description Order no.
Power supply AC/DC power supply unit; input: 100-240 V
AC ("10%);
1.5 m cable with international plug set
Output: 24 V DC, Max. 1.25 A; 2 m cable
with plug for IP20 modules.
1-NTX001
Voltage supply, open
line
3 m cable for voltage supply of a QuantumX
module. Plug for IP20 modules on one side
and exposed wires at the other end.
Note when using multiple modules: The
supply voltage can be looped through
IEEE1394b FireWire connections
(max. 1.5 A).
1-KAB271-3
Mechanical
Description Order no.
Housing connection
element for Quan
tumX modules, see
section 6, page 41
Mechanical connection elements for Quan
tumX modules (IP20 / IP65). Set consisting
of 2 case clips, including assembly material
for fast connection of 2 modules.
1-CASECLIP
Fitting panel for
QuantumX modules,
see section 6.3,
page 47
Fitting panel for mounting QuantumX mod
ules using case clips (1-CASECLIP), lash
ing strap or cable ties. Basic fastening by 4
screws.
1-CASEFIT
Case protection for
QuantumX modules,
see section 6.1,
page 42
Case protection (X enclosure frame) for
QuantumX modules.
1-CASEPROT