Safety Instructions
8 A04089_07_E00_02 HBM: public MX Modules
It is also essential to comply with the legal and safety requirements for the
application concerned during use. The same applies to the use of accessories.
Symbols
The following symbols may be found on the module:
Meaning: Electrostatic sensitive device
Devices marked with this symbol can be damaged beyond repair by electrostatic
discharge. Please observe the handling instructions for components exposed to the
risk of electrostatic discharge.
Meaning: Electric shock hazard
Devices marked with this symbol may allow improper use to result in an electric
shock. Please observe handling instructions for components capable of delivering
an electric shock.
Meaning: CE mark
The CE mark enables the manufacture to guarantee that the product complies with
the requirements of the relevant CE directives (the declaration of conformity is
available at www.hbmdoc.com).
Meaning: Statutory waste disposal mark
National and local regulations regarding the protection of the environment and
recycling of raw materials require old equipment to be separated from regular
domestic waste for disposal.
For more detailed information on disposal, please contact local authorities or the
dealer from whom you purchased the product.
The following symbols may be found in this manual.
WARNING
Meaning: Dangerous situation
Warns of a dangerous situation in which failure to comply with safety
requirements can result in death or serious bodily injury.
CAUTION
Meaning: Potentially dangerous situation
Warns of a potentially dangerous situation in which failure to comply with safety
requirements could result in bodily injury or damage to property.
NOTE
Meaning: Important information
Points out important information about the product or its handling.
To Next Page
Loading...
