40
3.0 Handling HeartWare
™
HVAD
™
System Components
3.7 Setting Up Your HeartWare
™
HVAD
™
System Carrying Cases
(continued)
To Set Up and Use Your HeartWare
®
Convertible Patient Pack:
To load the Controller and batteries into the HeartWare
®
Patient Pack:
1. a) Lay the bag on a at surface.
b) Open the top ap with the clear window facing you.
2. a) Open the clips on the Controller compartment.
b) Open the side aps.
3. Place the Controller in the compartment.
- The display screen should be facing you.
Steps continued on next page
Figure 62
Figure 63
Figure 64
To Next Page
Loading...
