heat-timer MPC Platinum - Day; Night Heat Adjustments; Temperature Display; - System Setpoint; Thermal Lockout

MPC Platinum Installation and Operation Manual
19
HT# 059085-00 F
------ SETTINGS ------
Season Summer
Shift
<System Settings>
<Schedules>
<Maintenance>
<System Startup>
- SYSTEM SETTINGS -
Season Winter
Day Heat Adjust E
Night Heat Adjust B
Day Cutoff 55
F
Night Cutoff 40
F
<More Settings>
SETTINGS pg 23
SYSTEM SETTINGS 2
Sys Setpoint 140 F
Sys Diff 25
F
Dis Stm Dly 15min
Boost Mode Vari
Sys Run-On 2 Min
Thermal Lockout On
<Remote Interface>
-------- SEASON -------
Winter
Summer
-- DAY ADJUSTMENT --
Higher = More heat
E
[
]
-- SYSTEM SETPOINT --
140
F
[
]
SYSTEM SENSOR DIFF
25
F
[
]
--- BOOST MODE---
Disabled
Manual
Vari
Vari+ESD
- BOOST ADJUSTMENT -
Higher = More Boost
0min
[
]
- BOOST ADJUSTMENT -
Higher = More Boost
3.0
[
]
SEASON pg 23
----- DAY CUTOFF -----
55
F
[
]
REMOTE INTERFACE
<Network Settings>
SpaceLockout Disable
Day Target 75
F
Night Target 65
F
BOOST pg 26
--- SYSTEM RUN-ON ---
2 min
[
]
- THERMAL LOCKOUT -
On
Off
REMOTE INTERFACE
pg 34
- SPACE LOCKOUT -
Disable
Enable
- DAY SPACE TARGET -
75
F
[
]
NIGHT SPACE TARGET
65
F
[
]
- BACNET SETTINGS -
BACnet ID 5
IP___,___,___,___
Msk___,___,___,___
Gwy___,___,___,___
Switch to MS/TP
INTERNET SETTINGS
IP___,___,___,___
Msk___,___,___,___
Gwy___,___,___,___
DNS___,___,___,___
MODBUS SETTINGS
MAC Address
Baud 9600
- BACNET SETTINGS -
BACnet ID 5
MS/TP Address 1
Baud 9600
Switch to IP
BACnet
Internet
MODBUS
DISTRICT STEAM DELAY
15min
[
]