HERSILL OXYMO - CONNECTION TO AN O2 PIPELINE

18
6.2. CONNECTION TO AN O
2
PIPELINE
1
Connect the regulator OXYMO P-15 to
a wall valve outlet.
2
Connect the spiral hose to the
regulator OXYMO P-15.
Place the OXYMO on the wall
regulator: sliding vertically
the plastic
piece on the rail of the OXYMO P-15
regulator.
Follow steps 3 to 8 described in the previous section.
I
CAUTION .
For use of OXYMO in a pipeline oxygen supply, this
last must have a pressure ranging between 2.8 to 7
bar.