28
If Smart Flow is activated, it is required to
set up two additional parameters: the first
to be presented on the screen is the
basal respiratory frequency (the
respiratory frequency having the patient
at rest) (bF).
Pressing the OK button changes the
letter S to F (Frequency) and you can
modify the value.
The default value is 20 breaths per
minute. The maximum programmable is
25 and the minimum 15. In the example
it has been selected 20.
To change the value, use the Plus or
Minus keys.
Once configured, you must confirm by
pressing OK.
To Next Page
Loading...
