Light interference
Certain precision optical instruments may interfere with the laser light emitted from the product. Please check all the instructions for these
instruments and take preventive measures if necessary. For example, protective leather covers are provided for certain product models; when
these lidars are temporarily not used for measurement, the leather covers can be applied to block laser light emission.
Personnel
Recommended operator qualifications
The product should be operated by professionals with engineering backgrounds or experience in operating optical, electrical, and mechanical
instruments. Please follow the instructions in this manual when operating the product and contact Hesai technical support if needed.
Medical device interference
•
Some components in the product can emit electromagnetic fields. If the product operators or people in the nearby environment wear medical
devices (such as cochlear implants, implanted pacemakers, and defibrillators), make sure to consult the physicians and medical device
manufacturers for medical advice, such as determining whether keeping the product a safe distance away from the medical devices is needed.
•
If you suspect that the product is interfering with your medical device, stop using the product immediately.
Installation and operation
Power supply
•
Do NOT use off-spec or damaged cables or adapters.
•
You are recommended to use only the cables and power adapters provided by Hesai.
•
If you are to design, configure, or select the power supply system (including cables) for the product, make sure to comply with the electrical
specifications in the product's user manual (refer to Section 1.4 Specifications and the Power Supply Requirements section if available); for
technical support, please contact Hesai.
-5-
To Next Page
Loading...
General