Hettich UNIVERSAL 320 R User Manual

9 / 44
Rev.: 04 / 11.2023
AB1401en_SA
Device overview
NOTICE
Damage to the device electronics due to incorrect voltage or
frequency at the device circuit breaker.
− Operate the device with the correct mains voltage and
mains frequency.
The value can be found in the technical data and on the
rating plate.
NOTICE
Damage to the device and samples due to premature pro-
gram termination.
Premature program termination is caused by power failure,
switching off during the program or pulling out the mains
plug.
− Do not switch off the device while the program is run-
ning.
−
Do not trigger the emergency release on the device
while the program is running.
− Do not pull out the mains plug while the program is
running.
3
Device overview
3.1
Technical data
Manufacturer Andreas Hettich GmbH & Co.KG,
D-78532 Tuttlingen
Model UNIVERSAL 320
Type 1401 1401-01
Mains voltage (
±10%)
200-240V1
～
100-127V1
～
Mains frequency 50-60 Hz 50-60 Hz
power consumption 400 VA 400 VA
Power consumption 2.0A 4.0A
max. capacity 4 x 200 ml
max. permissible density 1.2kg/dm
³
max. speed (RPM) 16000
max. acceleration (RCF) 24900
max. kinetic energy 9800 Nm
Obligation to perform
checks
(DGUV Rules 100-500)
(valid only in Germany)
No

Hettich UNIVERSAL 320 R Specifications

General

Brand	Hettich
Model	UNIVERSAL 320 R
Category	Laboratory Equipment
Language	English