HEX GS-911 - Page 23

To Next Page

To Previous Page

Hex GS-911 for BMW Motorcycles

_________________________________________________________________________________________________

2. Scroll through the AutoScan report.

 If fault codes are present, they will be listed by module

category.

 As an example, a typical engine-related fault code is shown

below:

3. When you have read all stored fault codes, you can gather

information to fix the cause of the problem using the methods that

follow:

 To read the motorcycle’s real-time software values, see

Reading software values from a chosen module in real

time.

 To view the motorcycle’s operational parameters as a 2-D

graph, see Reading software values from a chosen module

in real time.

 For instructions on how to log software values to a plottable

value/time graph for basic fault-finding, refer to

https://www.hexgs911.com/faq/how-do-i-import-and-view-the-

csv-realtime-data/.

 To permanently cure the problem that caused the fault

code, you must diagnose and eliminate the root cause of

the problem.

 If you see a notification that a fault code cannot be cleared,

the problem that caused the fault code is still present.

IMPORTANT

Not all motorcycles have all possible electronic modules.

Equipment levels depend on the motorcycle model, the

world market the motorcycle was first sold in, and factory-

fitted equipment requested by the motorcycle’s first owner.

IMPORTANT

A problem that generates a fault code may not always be

eliminated by deleting the fault code.

A fault code is only a message that tells you a problem

exists. It is not the problem itself.