HEX GS-911 - Choosing the Right GS-911 Device

To Next Page

To Previous Page

Hex GS-911 for BMW Motorcycles

_________________________________________________________________________________________________

Most steady-state or intermittent electronic problems and faults may go

unnoticed because no warning lights or icons appear. Sometimes, they

are not recognised by the motorcycle’s software as a problem (and

therefore do not generate fault codes). GS-911 can be used to diagnose

such problems by reading software values in real time.

When GS-911 is connected to the motorcycle, it shows you all fault codes

that have been logged. Depending on the motorcycle model, the GS-911

will likely also include Service functions that allow you to test suspect

components yourself.

GS-911 will not damage your motorcycle. It works in exactly the same way

as the diagnostic equipment that automotive dealers use to find and repair

problems.

 GS-911 powers itself on whenever it is connected to a motorcycle

or to a computer’s USB port.

 Depending on the commands it receives, GS-911 can passively

read information (like fault codes) from control units, and actively

control hardware components (for example, by changing On/Off

status).

 GS-911 is easy to use and fail-safe. The GS-911 and its software

cannot damage a motorcycle in any way.

 GS-911 can be ‘hot plugged’, and does not need to be ‘ejected’ or

‘safely removed’.

2.4 Choosing the right GS-911 device

A number of different GS-911s have been produced in response to

changing hardware and software technologies.

If you need help with choosing the correct GS-911 for your needs, go to

https://www.hexgs911.com/how-do-i-choose-a-model/.