HEX GS-911 - Selecting Motorcycle Series and Model

Hex GS-911 for BMW Motorcycles
_________________________________________________________________________________________________
_________________________________________________________________________________________________
© Hex Innovate 2021-2022 Page 24 of 38 GS-911 2207.2
4. To delete all current fault codes from all electronic modules at the
same time, click Clear All faults.
5. To E-mail the AutoScan report, click the icon at the bottom of
the AutoScan report. Follow the prompts to completion.
6. To save a copy of the AutoScan report as a plain-text file, click the
icon at the bottom of the AutoScan report. Follow the prompts
to completion.
7. To print a copy of the AutoScan report, click the icon at the
bottom of the AutoScan report. Follow the prompts to completion.
9.4 Selecting a motorcycle series and model
Before doing any diagnostic or maintenance function, you must specify
the series and model of motorcycle that GS-911 is connected to.
GS-911 will attempt to determine the series and model automatically when
Battery voltage is detected. We recommend you use the Detected
Vehicle option.
In the unlikely event that GS-911 cannot select the correct series or
model, use the Select Vehicle option to choose the motorcycle series and
model manually by doing the steps that follow:
1. Click Select Vehicle.
 The motorcycle series selector will be shown.
2. For BMW motorcycles, click the link for the correct BMW series.
For Husqvarna motorcycles, click Husqvarna.
 The chassis selection dialogue will be shown.
3. Click the link for the correct chassis type.
 The motorcycle model listing will be shown.
TIP
GS-911 also supports 652 cm
3
and 898 cm
3
Husqvarna
motorcycles manufactured between 2011 and 2014.
IMPORTANT
Make sure the correct motorcycle series is selected. If the
wrong series is selected, incorrect or misleading data may
be shown.
TIP
If the motorcycle type can be determined, a motorcycle icon
will be shown next to the correct link.